JVC CA-UXE15 - Manual (Page 23)

20
Turning Off the Power Automatically
Remote
ONLY
To turn off the System after
playback is over — Auto Standby
When Auto Standby is in use, the A.STANDBY
indicator lights on the display.
When the disc playback stops, the A.STANDBY
indicator starts fl ashing.
If no operation is done for about 3 minutes while
the indicator is fl ashing, the System turns off
(stands by) automatically.
To turn off the System after a certain
period of time — Sleep Timer
1 Specify the time (in minutes).
2 Wait until the set time goes off.
To check the time remaining before the
shut-off time
• If you press the button repeatedly, you can
change the shutoff time.
10
OFF
20 30 60
120 90