JVC CA-UXE15 User Manual

Page 15

To locate a particular portion

While playing a disc, press and hold until the
portion you want is reached.

To locate a track directly and

start play

Remote
ONLY

Examples:

To select track number 5,
press 5.
To select track number 15,
press

=10

To select track number 20,
press

=10

To select track number 125
(for MP3/WMA only), press

Playing Back from the USB Memory or
Digital Audio Player

This System is equipped with a USB MEMORY
terminal on the front panel. You can connect
your USB Memory or Digital Audio Player (DAP)
to this terminal and enjoy the sound out of your
USB Memory or DAP.
• Remember you cannot send any signal or data

to your PC from this System.

✎

IMPORTANT

• Always set volume to “VOL MIN” when connecting

or disconnecting the other equipment.

• Connect the USB Memory or DAP directly to the

front panel of the unit. Connecting via a USB hub
may result in malfunction.

• USB Memory and DAPs compatible with the USB

mass storage class specifi cations are connectable.

• Some DAPs are not compatible with the unit.
• Copyrighted tracks (WMA-DRM* tracks) cannot be

played on the unit.

• Coded or encrypted tracks in a special method

cannot be played on the unit.

* DRM (Digital Rights Management): Any of several

technical methods used to control or restrict the
use of digital media content on electronic devices
with such technologies installed.

To connect the USB Memory or DAP

Connect the DAP to the System using the USB
cable supplied with the DAP.

• Use a USB cable with a

“series A” plug at the

System end.

• When disconnecting the USB Memory or DAP,

make sure that playback is fi nished and that
the System is in the stop condition.

To play back sounds on the

USB Memory or DAP

• The USB MEMORY lamp on the left of the

USB MEMORY terminal fl ashes while USB
MEMORY is selected for the source.

To select a track/group*

* For details about the group selection, see

“For

MP3/WMA playback

” on page 13.

Fast-forwards the track.

Fast-reverses the track.

To start

To stop

Increase the track/group* numbers.

Decrease the track/group* numbers.