JVC CA-UXE15 - Manual (Page 22)

19
To adjust the treble
Changing the Display Brightness
— DIMMER
Remote
ONLY
You can dim the display window.
memo
• If you press the button while the system is
turned off, the clock indication turns off and
the system goes into the ECO mode, reducing
the standby power consumption.
Setting the Clock
Remote
ONLY
Without setting the built-in clock, you cannot use
the Daily Timer and sleep Timer (see page 24).
• To exit from the clock setting, press CLOCK/
TIMER as required.
• To go back to the previous step, press
CANCEL.
1 Activate the clock setting mode.
• If you have already adjusted the clock before,
press the button repeatedly until the clock
setting mode (see page 24) is selected.
2 Adjust the hour.
3 Adjust the minute.
The built-in clock starts working.
To check the current time during play
If there is a power failure
The clock loses the setting and is reset to “00:00.
(blinking) ” You need to set the clock again.
DIMMER ON
DIMMER OFF
(Canceled)
ECO OFF
(Canceled)
ECO ON
CLOCK
Source information
TREBLE BASS
Canceled