Override automatic tracking, Adjust tracking manually, Return to automatic tracking – JVC HR-J249EK User Manual
Page 14: Activate high-speed search, Playback (cont.), Manual tracking, High-speed (turbo) search
14
1
2
4
5
3
6
8
0
7
9
2
4
1
3
TV PROG.
REVIEW
Manual Tracking
Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the TV PROG. buttons.
OVERRIDE AUTOMATIC
TRACKING
1
Press
on the remote to engage manual tracking.
ADJUST TRACKING
MANUALLY
2
Press TV PROG. + or – to adjust tracking.
RETURN TO AUTOMATIC
TRACKING
3
Press
on the remote to re-engage automatic
tracking.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
High-Speed (Turbo) Search
ACTIVATE HIGH-SPEED
SEARCH
1
During playback or still, turn the SHUTTLE ring all the
way to the right for forward high-speed search, or to the
left for reverse high-speed search. Releasing SHUTTLE
resumes still picture playback.
OR
● For forward high-speed search, turn the SHUTTLE
ring all the way to the right and release it within 1
second.
● For reverse high-speed search, turn the SHUTTLE ring
all the way to the left and release it within 1 second.
OR
Press FF for forward high-speed search, or REW for
reverse high-speed search.
To resume normal playback, press PLAY.
NOTES:
●
For short searches, press and hold
FF
or
REW
for over 2
seconds. When released, normal playback resumes.
●
In the search, still, or frame by frame playback mode, the
picture may be distorted, and there may be a loss of colour.
q
TV PROG.
SHUTTLE
PLAY
FF
REW
3R PICTURE
PLAYBACK (cont.)
COUNTER RESET
C.RESET
PUSH JOG
C. MEMORY
STOP
PLAY
STOP