JVC LPT0762-001B - Manual (Page 34)

Filename [XVS20AG_07S-VHS.fm]
Masterpage:Left+
34
EN
Page 34 April 9, 2003 10:50 am
OPERATIONS ON S-VHS DECK (cont.)
Express Timer
Programming
If you do not know the G- CODE number for the programme you
wish to record, use the following procedure to set your unit to
timer-record the programme.
Example: To timer-record the programme from 21:00 to
22:00 on 25th December, on channel 1.
A
Select the S-VHS deck.
On the unit
Press S-VHS/DVD repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
B
Access the G- CODE /S HOW V IEW screen.
Press PROG.
C
Access the Programme screen.
D
Enter the programme start time.
E
Enter the programme stop time.
Press STOP +/– to enter the time you want recording to
stop.
● Press and hold STOP +/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
F
Enter the programme date.
Press DATE +/–.
● The current date appears on the TV screen. The date you enter
appears in its place.
Before performing Express Timer Programming:
● Make sure that the unit’s built-in clock is set properly.
● Insert a cassette with the safety tab in place. The unit will
come on automatically.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/S-VHS/DVD switch to the right.
Press START +/–. (If you’re
just starting out, “P1”
appears.)
Press START +/– to enter the
time you want recording to
start.
● Press and hold START +/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
[+/–]
[PROG] : EXIT
– P1 –
START STOP
– –:– – – –:– –
SP
DATE TV PROG
– –.– – – –
[+/–]
[PROG] : EXIT
– P1 –
START STOP
21:00 – –:– –
SP
DATE TV PROG
– –.– – – –
XVS20AG_01.book Page 34 Wednesday, April 9, 2003 10:53 AM