JVC TH-BA3 - Manual

When you use the subwoofer (and wireless receiver unit*) for the first time, activate wireless pairing.
Activate wireless pairing
5
While “
✽✽” is blinking, activate the wireless
pairing on the subwoofer.
You may need to press the button repeatedly until “OK”
appears on the display.
If “
✽✽” stops blinking before the wireless pairing is
completed, return to step 4.
•
•
Only for TH-BA3:
6
Repeat step 4.
7
While “
✽✽” is blinking, activate the wireless
pairing on the wireless receiver unit.
You may need to press the button repeatedly until “OK”
appears on the display.
If “
✽✽” stops blinking before the wireless pairing is
completed, return to step 6.
•
•
1
Connect the supplied AC adapter to the DC IN
jack on the center unit (and wireless receiver
unit*). Then connect the supplied AC power
cord to the AC adapter, and plug it in to a wall
outlet.
2
Plug in the power cord of the subwoofer to a
wall outlet.
3
Turn on the System.
4
Activate the wireless pairing on the center
unit.
The POWER ON lamps on the subwoofer and wireless
receiver unit* turns blue.
Now, you can use the subwoofer (and wireless receiver unit*).
Sound comes out through the subwoofer (and surround speakers*) when an audio signal comes in to the center unit.
Wireless pairing is not canceled even if the AC power cords are pulled out from the wall outlet.
Only for TH-BA3
•
*
GVT0301-007A[J/C]
0809WMKMDWJMM
EN, FR
© 2009 Victor Company of Japan, Limited
Press.
Press and hold for 4 seconds.
“OK” appears on the display of the
center unit.
“
✽✽” blinks on the display.
Press using a ball-point pen etc.
AC adapter AC power cord
To a wall outlet To the center unit (and
wireless receiver unit*)
Front panel of the center unit
Front panel of the center unit
Rear side of the subwoofer
ENGLISH
“OK” appears on the display of the
center unit.
Press using a ball-point pen etc.
Rear side of the wireless receiver unit
Pairing_JC_f.indd 1 Pairing_JC_f.indd 1 09.7.31 4:32:20 PM 09.7.31 4:32:20 PM