JVC CA-MXKB25 User Manual
Ca-mxkb25
Table of contents
Document Outline
- INSTRUCTIONS
- COMPACT COMPONENT SYSTEM
- CA-MXKB25
- Warnings, Cautions and Others
- IMPORTANT for the U.K.
- IMPORTANT:
- Caution — STANDBY/ON button!
- Caution: Proper Ventilation
- CAUTION
- CAUTION
- 1 Do not block the ventilation openings or holes. (If the ventilation openings or holes are block...
- 2 Do not place any naked flame sources, such as lighted candles, on the apparatus.
- 3 When discarding batteries, environmental problems must be considered and local rules or laws go...
- 4 Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects fille...
- SAFETY INSTRUCTIONS
- “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”
- Introduction
- Thank you for purchasing the JVC Compact Component System.
- We hope it will be a valued addition to your home, giving you years of enjoyment.
- Be sure to read this instruction manual carefully before operating your new stereo system.
- In it you will find all the information you need to set up and use the system.
- If you have a query that is not answered by the manual, please contact your dealer.
- Features
- Here are some of the things that make your System both powerful and simple to use.
- The controls and operations have been redesigned to make them very easy to use, freeing you to ju...
- The great SEA (Sound Effect Amplifier) effects Rock, Pop and Classics are provided.
- The Active Bass EX. (Extension) circuitry faithfully reproduces low frequency sounds.
- A 20-station preset capability (10 FM and 10 AM (MW)) in addition to auto-seek and manual tuning.
- CD changer function can operate 3 discs.
- Two Decks enabling tape dubbing.
- Timer functions; Daily Timer, REC (Recording) Timer, and Sleep Timer.
- You can connect various external units, such as an MD recorder.
- The CD Player can play back a CD-R and CD-RW.
- Here are some of the things that make your System both powerful and simple to use.
- How This Manual Is Organized
- • Basic information that is the same for many different functions - e.g. setting the volume - is ...
- • The names of buttons/controls and display messages are written in all capital letters: e.g. FM/...
- • If the button names on the Unit and the Remote Control are the same, the description on where t...
- • System functions are written with an initial capital letter only: e.g. Normal Play.
- Use the table of contents to look up specific information you require.
- We have enjoyed making this manual for you, and hope it serves you in enjoying the many features ...
- IMPORTANT CAUTIONS
- Table of Contents
- Getting Started
- Accessories
- How To Put Batteries In the Remote Control
- R03 (UM-4)/AAA (24F)
- Remote sensor
- FM wire antenna
- Attach the AM (MW) loop to its base by snapping the tabs on the loop into the slot in the base.
- Right side (rear view)
- Signal cord (not supplied)
- Connecting to the Wall Outlet
- DEMO Mode
- COMPU Play
- JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single...
- With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external e...
- How One Touch Operation works in each case is explained in the section dealing with that function.
- On the Unit
- On the Remote Control
- Basic Operations
- Using the Tuner
- FM MODE
- on the Unit
- When changing the Band
- 1 Select a band by pressing the FM/AM button.
- 2 Press the 22 or Á button to tune in a station.
- 3 Press the SET button.
- 4 Press the 4 or ¢ button to select the preset number.
- 5 Press the SET button.
- 6 Repeat above steps 2 to 5 for each station you want to store in memory with a preset number.
- To Change the FM Reception Mode
- Using the CD Player
- CD 6
- Selected Disc indicator
- With the label side up
- GROUP indicator appears when the MP3 playback mode is the GROUP mode.
- Track number
- Track number
- Total track number
- Total group number
- Disc number
- Disc number
- Using the Cassette Deck (Listening to a Tape)
- Using the Cassette Deck (Recording)
- Adhesive tape
- Tape travelling direction
- 2 Prepare the source, by, for example, tuning in a radio station, loading CDs, or turning on conn...
- 3 Press the REC START/STOP button on the Unit.
- 1 Set to AM station and start recording.
- 2 Press the FM MODE button on the Remote Control to eliminate the beats.
- CD Synchro Recording
- Tape to Tape Recording (DUBBING)
- Using an External Equipment
- Using the Timers
- ¢
- Setting the Clock
- Fixing the Clock
- Setting the Daily Timer
- 1 Press the CLOCK/TIMER button until “ON TIME” immediately after “DAILY” appears on the display.
- 2 Setting the ON time (Example: 10:15).
- 3 Setting the OFF time (Example: 13:15).
- 4 Selecting the music source.
- 5 Setting the volume level.
- 6 Press the SET button.
- 7 Press the STANDBY/ON button to turn off the System if neccessary.
- 1 Press the CLOCK/TIMER button on the Unit repeatedly until the “DAILY” appears on the display.
- 2 Press the CANCEL button on the Unit.
- 1 Press the CLOCK/TIMER button on the Unit repeatedly until the “DAILY” appears on the display.
- 2 Press the SET button on the Unit.
- Setting the REC (Recording) Timer
- 1 Insert a blank or erasable tape into the Deck B and wind past the tape leader.
- 2 Press the CLOCK/TIMER button until “ON TIME” immediately after “REC TU” appears on the display.
- 3 Setting the ON time you want the System to turn on.
- 4 Setting the OFF time you want the System to turn off.
- 5 Select the preset station for recording.
- 6 Press the STANDBY/ON button to turn off the System, if necessary.
- 1 Press the CLOCK/TIMER button on the Unit repeatedly until “REC TU” appears on the display.
- 2 Press the CANCEL button on the Unit.
- 1 Press the CLOCK/TIMER button on the Unit repeatedly until “REC TU” appears on the display.
- 2 Press the SET button on the Unit.
- Setting the SLEEP Timer
- Timer Priority
- REC Timer
- ¢
- Care And Maintenance
- Troubleshooting
- Specification
- 0405NSMCREORI