Changing the menu settings, Continued) – JVC Everio GZ-HD10 User Manual
Page 52

52
EN
BASIC SETTINGS menus
Settings: [ ] = Factory-preset
VIDEO OUTPUT
Set the aspect (16:9/4:3) to the
screen of the connected television
when outputting videos from the AV
connector.
4:3 / [16:9]
COMPONENT OUTPUT
Sets the definition of the video
output from the COMPONENT
connector.
[480i]: Outputs at 480i.
1080i: Outputs at 1080i.
HDMI OUTPUT
Sets the definition of the video
output from the HDMI connector.
[AUTO1]: The definition that best suits the connected
device is automatically selected: 480i, 480p, 1080i or
1080p.
AUTO2: Select when the video is not projected in [AUTO1]
correctly.
480p: Select when the video is not projected in [AUTO2]
correctly.
AUTO FINALIZE
Sets the disc to a readable state.
OFF: Makes created DVDs recordable (not playable on
device other than the camera).
[ON]: Finalizes created DVDs so that they can be played
back on DVD burner.
NOTES
•
When you play back a DVD created when [OFF] is set on
DVD burner
, select [FINALIZE] on the DVD creation screen.
(
T p. 44)
•
When you create two or more DVDs at the same time, other
than the last DVD is finalized automatically even if the setting
is [OFF].
CLEAN-UP HDD
Writing speed to HDD tends to
become slow after long periods
of repeated use. Execute cleanup
periodically to regain the writing
speed.
Connect the AC adapter.
YES: Performs this function. Select [OK] when completed.
[NO]: Cancels this function.
NOTE
Depending on the condition of the HDD, it may take several
minutes for the cleanup process to be completed.
FORMAT HDD
Ensures stable speeds and
operation when accessing the hard
disk drive.
[FILE]: Initializes all files in the hard disk drive.
FILE + MANAGEMENT NO: Initializes all files and
management numbers in the hard disk drive. (
T p. 60)
NOTE
Be aware that all files and data including protected files will be
erased by the formatting process.
Changing the Menu Settings
(Continued)