JVC Everio GZ-HD10 User Manual
Page 51

51
EN
BASIC SETTINGS menus
Settings: [ ] = Factory-preset
LANGUAGE
Sets the display language. (
Thp.h17)
[ENGLISH]
You have a choice of 23 languages.
CLOCK ADJUST
Sets the time. (
Thp.h17)
DATE / TIME
DATE DISPLAY STYLE
Sets the date and time display
format.
DATE STYLE:
[month.day.year] / year.month.day / day.month.year
TIME:
24h / [12h]
MONITOR BRIGHT
Sets the brightness of the LCD
monitor.
Adjust the brightness of the display by moving the set lever
to
/ , then press down.
MONITOR BACKLIGHT
Enables you to adjust the brightness
of backlight on the monitor.
BRIGHTER: Brightens the backlight on the monitor
regardless of the surrounding conditions.
STANDARD: Select this when saving the battery life.
[AUTO] : The brightness will automatically be set
to [BRIGHTER] when using outdoors and to
[STANDARD] when using indoors. (when using the
battery pack)
DROP DETECTION
Prevents damage to the HDD by
turning off the power automatically
when it is detected that the camera
dropped.
OFF: Deactivates the function.
[ON]: Activates the function.
To turn on the camera when the drop detection
worked, close the LCD monitor and open it again.
CAUTION
•
The built-in hard disk of the camera may not be protected
even if the setting is [ON].
•
When recording/playback stops even if the camera is not
dropped, set the setting to [OFF].
DEMO MODE
Introduces special features of the
camera when there is no operation
for about 3 minutes during recording
mode.
OFF: Deactivates the function.
[ON]: Activates the function.
NOTES
•
The demonstration only works when the AC adapter is
connected, not with the battery.
•
If a microSD card is in the camera, demonstration will not
take place even if this mode is set to [ON].
DISPLAY ON TV
Displays camera’s on-screen display
on a TV screen.
[OFF]: Does not display on TV.
ON: Displays on TV.
NOTE
When connected to a TV using the i.LINK connector, the
camera’s on-screen display is not displayed on the TV, even if
this setting is [ON].