Lens screen, Process screen (continued), Process screen – JVC KY-F1030 User Manual
Page 22: Menu screen settings (continued)
E38
PROCESS screen (continued)
[ ] indicates the factory setting
Item
ABL
LEVEL
When “ON” is
selected
COLOR MATRIX.
B – Y GAIN (+)
When “ADJUST”
is selected
B – Y GAIN (–)
When “ADJUST”
is selected
R – Y GAIN (+)
When “ADJUST”
is selected
R – Y GAIN (–)
When “ADJUST”
is selected
B –G HUE (+)
When “ADJUST”
is selected
B – G HUE (–)
When “ADJUST”
is selected
R – G HUE (+)
When “ADJUST”
is selected
R – G HUE (–)
When “ADJUST”
is selected
Set Value
[ON]
OFF
–32
–31
•
[NORMAL]
•
31
[NORMAL]
ADJUST
–8
–7
•
[NORMAL]
•
7
8
–32
–31
•
[NORMAL]
•
30
31
Contents
Used to set whether to use automatic adjustment of the
black level in accordance with the signal level during shoot-
ing. Use this adjustment when the black level of the video
image fluctuates.
Black level is adjusted.
Increasing the value:
Lowers the black level.
(Compensation becomes higher)
Decreasing the value: Raises the black level.
(Compensation becomes smaller)
Used to set whether the color matrix value should be a
standard value or variable.
NORMAL:
Standard value used for color matrix.
ADJUST:
The color matrix becomes variable.
The following adjustments can only be made
when this setting is selected.
Adjusts the color saturation.
Increasing the value:
Colors become more glowing
Decreasing the value: Colors become duller
° B – Y GAIN (+): More blue
° B – Y GAIN (–): More yellow
° B – Y GAIN (+): More red/magenta
° B – Y GAIN (–): More green/cyan
Adjusts the hue.
° B – G HUE (+): More blue
° B – G HUE (–): More yellow
° R – G HUE (+): More red/magenta
° R – G HUE (–): More green/cyan
5. Menu screen settings (continued)
E39
Item
PIXEL COMP.
PIXEL
CHECK
PROCESS screen
Set Value
[OFF]
ON
LENS screen
Item
IRIS
IRIS LEVEL
When
“MANUAL” is
selected
SERVO SEL
FOCUS
When
“POSITION”
is
selected
ZOOM When
“POSITION”
is selected
Set Value
[AUTO]
MANUAL
0
1
•
[128]
•
255
[POSITION]
SPEED
0
1
•
[128]
•
255
0
1
•
[128]
•
255
Contents
Switched in accordance with the employed lens.
AUTO:
When auto-iris lens is employed.
MANUAL:
• When manual iris lens is employed.
• No lens mounted.
• When auto-iris lens is mounted but used as
manual iris lens.
* If the auto-iris lens cable is not connected to the [LENS]
connector, the setting automatically becomes “MANUAL”.
Sets the iris level when “MANUAL” is selected for the IRIS
MODE.
Increasing the value:
Opens the iris
Decreasing the value: Closes the iris
Sets the lens control method.
Normally, use the “POSITION” setting.
* If the lens control cable is not connected to the [MD
CONTROL] connector, “- - - - ” is displayed.
Selects the focus position.
Increasing the value:
Focus far away
Decreasing the value: Focus nearby
Selects the zoom position.
Increasing the value:
Toward telephoto
Decreasing the value: Toward wide-angle
[ ] indicates the factory setting
Contents
Selects whether or not white spot compensation should
be performed.
OFF : White spot compensation not performed.
ON
: White spot compensation performed.
੬ page E28 [White spot compensation]
Detects the positions of white spots.
੬ page E28 [White spot compensation]
[ ] indicates the factory setting