JVC KY-F1030 - Manual (Page 19)

E32
5. Menu screen settings (continued)
Setting procedure
1.
Open the side switch panel, and press the [MENU] but-
ton for 2 seconds or longer. The [MENU] screen ap-
pears on the monitor screen.
* The [MENU (QUICK)] screen can be displayed by
pressing the [MENU] button for less than 2 seconds.
2.
Press the [UP] or [DOWN] button to select a menu item
(the menu item will be displayed in purple when se-
lected), then press the [SET] button to display the
submenu screen.
3.
In the submenu screen, press the [UP] or [DOWN] but-
ton in the same manner as above to select a submenu
item, then press the [SET] button. The setting will be
confirmed and registered to the memory.
The set value will be displayed in purple, indicating that
it can be changed.
4.
Use the [UP] and [DOWN] buttons to change to set
value, then press the [SET] button to confirm (the set
value will return to white).
MEMO
• Continuous pressing of the [UP] or [DOWN] button will
change the set value in increment of 10. Use this feature
when making large changes in value.
• Pressing the [MENU] button without pressing the [SET] but-
ton will return the setting to the previous value without mak-
ing changes.
5.
Press the [MENU] button twice to return to the normal
screen.
[UP]
[SET]
[DOWN] [MENU]
UP/AW
SET MENU
DOWN
1 2 3 4
WHITE BALANCE screen
(example)
MENU screen
Inside window
Item Set value
Change with
[UP] and
[DOWN] buttons
E33
Contents
Switched in accordance with the used lens.
AUTO:
When using auto-iris lens.
MANUAL: • When using manual iris lens.
• Lens not mounted
• When using manual iris while auto-iris lens
is mounted.
*When the auto-iris lens cable is not connected to the
[LENS] connector, the setting automatically becomes
“MANUAL”.
Used to adjust the video level when auto-iris, ALC and
EEI are used,
Increasing the value:
Raises the level
Decreasing the value: Lowers the level
Used to set the iris level when the IRIS MODE is set to
“MANUAL”.
Increasing the value:
Opens the iris
Decreasing the value: Closes the iris
Menu contents
1 : EXPOSURE: ................. Used for settings related to the video level, such as iris, shutter, sensitivity, etc.
2 : WHITE BALANCE: ........ Used to make settings for color temperature and white balance.
3 : PROCESS: .................... Used to make settings for detail compensation, gamma, master
black, flare compensation, Auto Black Level (ABL), etc.
4 : LENS : ........................... Sets the control method for the lens iris and lens focus, and zoom control method.
5 : SYSTEM SETTING: ...... Sets the screen display method and level of test pattern.
EXPOSURE screen
Item
IRIS MODE
Set Value
[AUTO]
MANUAL
-128
-127
:
[NORMAL]
:
126
127
[FULL]
SQUARE
SPOT
0
1
•
[128]
•
254
255
[ ] indicates the factory setting
FULL SQUARE SPOT
MEMO
During selection of
the detection area,
the detection area is
s h o w n o n t h e
screen connected to
the analog output.
AE LEVEL
AE AREA
IRIS
LEVEL
Detection
area
Detection
area
Detection area
MEMO
“----“ is displayed when auto-iris, ALC, and EEI are all set to
not operate.
Used to set the detection area for auto-iris. Switch
the setting in accordance with the conditions of use.