JVC XM-G6 - Manual (Page 18)

13
English
5
Press 6 (play/pause) button on the MD recorder
to start recording.
The REC indicator remains lit, and recording starts.
• To stop recording temporarily, press REC PAUSE
button or 6 (play/pause) button on the MD recorder
or MD
6 (play/pause) button on the remote control.
• To resume recording, press
6 (play/pause) button
on the MD recorder or MD 6 (play/pause) button
on the remote control again.
6
Press
7 (stop) button to stop recording as required.
Information in the display window changes as follows:
You can remove the MD by pressing
0 (eject) button.
Using DISPLAY/CHARA. button while recording
Each time you press the button, the display window
switches between the remaining time and the elapsed
time with the current track number alternately.
Monophonic Long Recording
Using the REC MODE settings, you can record FM/AM
broadcasts for twice as long as given recording time of the
MD in monaural reception.
1
Repeat the steps 1, 2 and 3 in previous page.
2
Press REC MODE button to select a recording mode
as follows:
3
Press SET button to start recording.
You can double the recording time length, and
information appears in the display window as follows:
Remaining time for recording
• To stop recording temporarily, press REC PAUSE
button or
6 (play/pause) button on the MD recorder
or MD
6 (play/pause) button on the remote control.
• To resume recording, press
6 (play/pause) button
on the MD recorder or MD 6 (play/pause) button
on the remote control again.
Track marking in Long Recording
Putting track marks manually while recording, you
can easily identify and edit desired portions of the
broadcast program.
To put a track mark, press SET button as required
while recording and you can find out the current track
number using DISPLAY/CHARA. button.
4
Press
7 (stop) button to stop recording as required.
“WRITING” appears in the display window, and you
can remove the MD by pressing
0 (eject) button.
Continued
EN11-18.XM-G6[J]/2b 99.12.09, 17:58 13