JVC XM-G6 - Manual (Page 13)

8
English
If the MD or each track has a title
The disc title and track titles will be shown at the
lower portion of the display window (Title longer than
11 characters scrolls to show the entire title).
DO NOT insert any foreign matters.
2
Press
6 (play/pause) button on the MD recorder
or MD
6 (play/pause) button on the remote
control.
Each track of the MD starts playing back, and playback
information appears in the display window as follows:
Current track number
Elapsed playing time
• To stop playing back for a moment, press
6
(play/pause) button on the MD recorder.
The playback time starts blinking in the display
window.
• To resume playback, press
6 (play/pause)
button again.
Playback continues from the point where it was
stopped for a while.
3
Press
7 (stop) button to stop playing back the MD.
4
Press
0 (eject) button on the MD recorder to remove
the MD.
• Pressing
0 (eject) button during playback directly,
the MD recorder stops playback and ejects the MD.
«
Searching and Skipping Tracks
While playing back an MD, you can do the following
operations.
To search and skip to a particular point in a track
During playback, press and hold
4 / ¢ button to meet
the desired passages in a track:
Press and hold
¢ button:
Fast forwards in the track.
Press and hold
4 button:
Fast reverses in the track.
UP/DOWN button on the remote control is also
available to search and skip operations.
To go to another track
Before or during playback, press
4 / ¢ button
repeatedly:
Press
¢ button:
Skips to the beginning of the next and succeeding
tracks.
Press 4 button:
Goes back to the beginning of the current and
previous tracks.
Rotating MULTI JOG dial clockwise also changes
the tracks forwards quickly, while rotating it
counterclockwise the tracks reverses quickly (< / >
button on the remote control also available).
Continued
EN01-10.XM-G6[J]/2b 99.12.15, 16:09 8