Set channel position, Engage recorder's timer mode – JVC 0701MNVIDPJ User Manual

Page 33

SET CHANNEL POSITION

Turn the JOG dial to the left or right.

● You can cancel the setting at any time by pressing

and holding the JOG dial for more than 3 seconds.
Repeat from the step 2.

ENGAGE RECORDER'S

TIMER MODE

Press 24H EXPRESS ‰

‰

The recorder turns off automatically and “‰” appears
on the display panel.

NOTES:

●

If “Err” appears on the display panel, repeat the steps again.

●

When a menu screen is shown, you cannot use 24H Express
Timer programming function. Press MENU to return to normal
screen, and try again.

●

You can use 24H Express Timer programming function also
when the recorder is turned off.

●

For 24H Express Timer programming function, the program
overlap warning display does not appear even if some
programs overlap each other.

●

In case of a power failure after programming, the recorder's
memory backup keeps your selections (if the lithium battery is
not exhausted).