Start playback, Activate repeat playback, Stop playback – JVC 0701MNV*ID*PJ User Manual
Page 17: Access main menu screen, Access function set screen, Select video stabilizer set mode, Return to normal screen, Repeat playback, Video stabilizer

EN
17
Repeat Playback
Your video recorder can automatically play back the whole tape
100 times repeatedly.
START PLAYBACK
1
Press PLAY.
ACTIVATE REPEAT
PLAYBACK
2
Press PLAY and hold for over 5 seconds, then release.
● The Play indicator ( ) on the display panel blinks
slowly.
● The tape plays 100 times automatically, and then
stops.
STOP PLAYBACK
3
Press STOP at any time to stop playback.
NOTES:
●
Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.
●
Repeat Playback is not possible with a PAL tape recorded in
EP mode.
Video Stabilizer
You can automatically correct vertical vibrations in the picture
when playing back unstable recordings made on another
recorder.
* The default setting is "OFF".
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Press PUSH JOG
%fi to
place the pointer next to
"FUNCTION SET", then
press OK or PUSH JOG
#.
SELECT VIDEO STABILIZER
SET MODE
3
Press PUSH JOG
%fi to
place the pointer next to
"VIDEO STABILIZER", then
press OK or PUSH JOG
#
to select "ON" or "OFF".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
●
When you finish viewing a tape, be sure to set this function to
"OFF".
●
Regardless of the setting, this function has no effect during
recording and during special effects playback.
●
The on-screen display may jitter vertically when this function
is set to "ON".
●
To watch recordings with close-caption, set this function to
"OFF".
PREVIOUS PAGE
PROG. NAVIGATION
ON
AUTO SP
=LP TIMER
OFF
VIDEO STABILIZER
ON
S-VHS
ON
S-VHS ET
OFF
[
5/∞] =
[MENU] : EXIT
MAIN MENU
PROGRAMME NAVIGATION
FUNCTION SET
TUNER SET
INITIAL SET
[
5/∞] =
[MENU] : EXIT