JVC CA-MXDVA9 - Manual (Page 27)

– 24 –
Selecting Playback Modes
This unit cannot accept any disc operations while reading
disc contents.
Programming the Playing Order of the Titles
and Tracks—Program Play
You can arrange the order in which the titles (for DVD) and
tracks (for SVCD, VCD and CD) play before you start
playing. You can program up to 18 steps.
• When you use Program play for a SVCD or VCD with the
PBC function activated, the PBC function is turned off.
• Program play cannot be used on some DVD discs.
On the unit:
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 2
again.
1
Load discs.
• If the current playing source is not the DVD/SVCD/
VCD/CD player press DVD 3¥8, then 7 before going
to the next step.
2
Press PROGRAM so that
“PROGRAM” appears on the
display.
The PRGM (program) indicator also lights up on the
display.
• If a program has been stored in memory, the program is
called up.
3
Press one of the disc number
buttons (DVD1, DVD2 or
DVD3) you want to program.
4
Turn
4 / ¢ to select a title
or track number, then press SET.
5
To program another title or track from the
same disc, repeat step 4.
To program another title or track from a
different disc, repeat steps 3 and 4.
• Each time you select a title or track, the program item is
added up to 18 steps.
6
Press DVD
3¥8.
The titles and tracks are played in the
order you have programed.
To stop playing, press 7.
To go to the next title or track, turn 4 / ¢ to the right.
Even if you turn 4 / ¢ to the left
It just goes back to the beginning of the current title or track, but
cannot go back to the previous titles or tracks.
To modify the program
You can modify the program before or after playing.
To erase the last step, press
CANCEL/DEMO.
• Each time you press the button, the last
programed step is erased from the program.
To add steps in the program before playing,
simply select the disc number and title/track numbers you
want to add by following steps 3 to 5 of the programming
procedure.
To erase program completely, press 7 before or after
playing.
The program you have made will be also erased,
• when you remove all the discs, and then press DVD
3¥8.
• when you unplug the AC power cord.
• when a power failure occurs.
To exit from Program play mode, press PROGRAM after
playing. The PRGM (program) indicator goes off. The
program you have made is memorized.
To check the programed contents
Press PLAY MODE on the remote control. The programed
contents appear on the TV screen.
To erase the play mode screen, press PLAY MODE again.
Selected title or track number
Selected disc number Program step number
Ex.: When SVCD, VCD or CD is a
source disc.
Ex.: When SVCD, VCD or CD is a source disc.
Continued
EN24-27.CA-MXDVB10,B9,A9_f 02.4.24, 9:44 AM 24