beautypg.com

0 important spa owner information, 0 fcc notice, 0 important spa owner information 2.0 fcc notice – Jacuzzi J - 375 User Manual

Page 5

background image

1

J-300 series

J-300 Series

1.0

Important spa owner Information

Your Jacuzzi

®

J-300 Series spa is constructed to the highest standards

and is capable of providing many years of trouble-free use. However,
because heat retentive materials are utilized to insulate the spa for
efficient operation, an uncovered spa surface directly exposed to sunlight
and high temperatures for an extended period is subject to permanent
damage. Damage caused by exposing the spa to this abuse is not
covered under warranty. We recommend that you always keep the spa
full of water when it is exposed to direct sunlight and that you keep the
Jacuzzi premium insulating cover in place at all times when the spa is not
in use. Read and carefully follow the requirements for your spa’s support
base found in section 4.0 titled, “Choosing A Location” (page 9).

Jacuzzi constantly strives to offer the finest spas available,
therefore modifications and enhancements may be made which
affect the specifications, illustrations and/or instructions contained
herein.

2.0

FCC notice

This equipment has been tested and found to comply with the limits for
a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

Rearrange or relocate the receiving antenna.

1.

Increase the separation between the equipment and receiver.

2.

Connect the equipment into an outlet on a circuit different from the

3.

circuit connected.
Consult the dealer or an experienced radio/TV technician for help.

4.

Changes or modifications not expressly approved by the party
responsible for FCC compliance could void the user’s authority to
operate this equipment.

1

This manual is related to the following products: