Jacuzzi J - 375 - Manual (Page 30)

26
J-300 Series
10.4 light mode Button
This button offers 4 light modes for your enjoyment. Press this
button to select your favorite lighting effect as follows:
Press
Once
Press
Again
Press
Again
Press
Again
Solid Color Mode:
Selects one of 7 solid (high-intensity) colors of choice.
AMBER (X7) GREEN (X8) AQUA (X9) NEAR
WHITE (X10)
BLUE (X4) VIOLET (X5) RED (X6)
Freeze Color Blend Mode:
Selects or “freezes” your low speed blending color of choice.
Low-Speed Color Blend Mode:
Displays hundreds of colors in 20 seconds intervals.
High-Speed Color Blend Mode:
Displays hundreds of colors in 5 second intervals.
10.5 adjusting Individual Jet Flow
The water flow through individual jets in your spa can be
adjusted or turned off by rotating the outside jet ring. Many
jets also offer an adjustable center nozzle that allows you to
change the water discharge angle. Simply tilt the center nozzle in these
jets to the desired angle to customize your personal massage.
note: Always keep at least 6 adjustable jets open at all times to ensure
proper filtration characteristics within the spa.
10.6 adjusting powerpro Jets
With the nozzles of the PowerPro Jets positioned
straight ahead, the jet stream will be stationary. Pushing
the nozzle to one side causes the jet nozzle to rotate,
moving the jet stream in a circular pattern.
note: Jets may not spin with jets pump 1 running in
low speed.
26