JVC GET0063-001A - Manual (Page 19)

19
ENGLISH
CD CHANGER OPERATIONS
We recommend that you use one of the CH-X series
with your unit.
If you have another CD automatic changer, consult
your JVC car audio dealer for connections.
• For example, if your CD automatic changer is one of
the KD-MK series, you need a cord (KS-U15K) for
connecting it to this unit.
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with your
CD changer.
• If no discs are in the magazine of the CD
changer or the discs are inserted upside down,
“NO CD” or “NO DISC” will appear on the
display. If this happens, remove the magazine
and set the discs correctly.
• If “RESET 1” - “RESET 8” appears on the
display, something is wrong with the
connection between this unit and the CD
changer. If this happens, check the connection
and make sure the cords are connected firmly.
Then, press the reset button of the CD
changer.
C D –
C H
SEL
DISP
SSM
¢
4
FM/AM
SCM MODE 7 8 9 10 11 12 RND RPT MO
TAPE
CD-
CH
LOUD
CD CHANGER CONTROL
Multi
Music
Scan
4
¢
Press and hold ¢ , while
playing a CD, to fast-forward the
track.
Press and hold 4 , while
playing a CD, to reverse the
track.
Disc number
Track number
Playing CDs
Select the CD automatic changer (CD-CH).
Playback starts from the first
track of the first disc.
All tracks of all discs are played
back.
Note on One-Touch Operation:
When you press CD-CH, the power automatically turns
on. You do not have to press
to turn on the
power.
To fast-forward or reverse the track.
Elapsed playing time
(The clock time is shown if you press DISP
(display) to see the clock time. See page 15.)
EN19-20KS-FX711/KS-FX511[U]f 3/1/02, 12:51 19