JVC GET0063-001A - Manual (Page 14)

14
ENGLISH
4
Repeat steps 2 and 3 to adjust the
other items.
5
To turn on or off the loudness
function.
• See page 12 for details.
6
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
7
Repeat the same procedure to store
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on page 13.
LOUD
SCM
Your adjustment made for the selected sound
mode is stored in memory.
SCM
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Call up the sound mode you want to
adjust.
• See page 13 for details.
2
To adjust the bass or treble sound
level.
Select “BAS” or “TRE.”
3
Adjust the bass or treble level.
• See page 12 for details.
S E L
Ex.: When you select “SOFT”
Ex.: When you select “TRE (treble)”
EN12-14KS-FX711/KS-FX511[U]f 3/1/02, 9:52 14