JVC GET0063-001A - Manual (Page 16)

16
ENGLISH
Canceling Advanced SCM
—SCM LINK
You can cancel the Advanced SCM (Sound
Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound
mode can be stored in memory for each source
so that you can change the sound modes simply
by changing the sources.
• LINK ON: Advanced SCM (different sound
modes for different sources.)
• LINK OFF: Conventional SCM (one sound
mode for all sources.)
1
Press and hold SEL (select) for
more than 2 seconds.
“CLOCK H,” “CLOCK M,” “SCM LINK,”
“LEVEL,” “B. SKIP” or “EXT IN*” appears on
the display.
* Displayed only when one of
the following sources is
selected — FM, AM and
Tape.
2
Select “SCM LINK” if not shown on
the display.
3
Select the desired mode—“LINK ON”
or “LINK OFF.”
CLOCK H CLOCK M
LEVEL
SCM LINK EXT IN
B. SKIP
S E L
4
¢
S E L
4
Finish the setting.
Selecting the level display
—LEVEL
You can select the level display according to your
preference.
When shipped from the factory, “AUDIO2” is
selected.
• AUDIO1: Level meter illuminates.
• AUDIO2: Alternates level meter and
illumination display.
• OFF: Erases the audio level indicator.
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H,” “CLOCK M,” “SCM LINK,”
“LEVEL,” “B. SKIP” or “EXT IN*” appears on
the display.
* Displayed only when one of
the following sources is
selected — FM, AM and
Tape.
2
Select “LEVEL” if not shown on the
display.
LINK OFF LINK ON
S E L
CLOCK H CLOCK M
LEVEL
SCM LINK EXT IN
B. SKIP
4
¢
EN15-18KS-FX711/KS-FX511[U]f 3/1/02, 9:53 16