JVC TH-M606/TH-M603 - Manual (Page 18)

Connections
15
NOTE
• The way of connecting the system cord varies depending on the type
of the powered subwoofer.
You can enjoy the sound of an analog component.
NOTE
• The signals input to the VIDEO jack of the VCR IN jacks will be
output only from the VIDEO jack of the VIDEO OUT jacks, not from
the S-VIDEO jack of the VIDEO OUT jacks.
You can enjoy the sound of a digital component.
* DBS = Direct Broadcasting Satellite
NOTE
• Only digital audio signals can be input when selecting “DBS” as the
source to play. ( A pg. 19) When connecting a video component such
as a DBS tuner, operate this system to listen to the sound.
Make sure that all other connections have been completed.
CAUTION
• Disconnect the power cord before cleaning or moving the system.
• Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp and pull the plug so as not to damage the cord.
Connecting the powered
subwoofer
Connecting to an analog
component
Powered
subwoofer
System cord
(supplied)
Center unit
Align the 5 marks.
Align the 5 marks.
or
RCA pin plug
cord
(not supplied)
A To composite video output
B To S-video output
C To audio output
A B C
Center unit
VCR (A C or B C)
TV (C)
Cassette recorder (C)
Composite video
cord
(not supplied)
S-video cord
(not supplied)
or
Connecting to a digital
component
Connecting the power
cord
Digital optical cord (not supplied)
To digital optical output
DBS * tuner
MD recorder
Center unit
Center unit Powered
subwoofer
Power cord
(supplied)
Power cord
Plug into AC outlets.
TH-M606-505-501-303-301[JC]-04Start.fm Page 15 Friday, February 6, 2004 2:40 PM