beautypg.com

Troubleshooting, Continued) – JVC Everio GZ-HD320 User Manual

Page 70

background image

0

EN

Troubleshooting

(Continued)

Trouble

Action

Recor

ding

Recording cannot be

performed.

Slide the mode switch to select the desired mode (

!

or

#

).

Vertical lines appear on

recorded images.

Such a phenomenon occurs when shooting a subject illuminated

by bright light. This is not a malfunction.

Recording stops by

itself.

If the camcorder temperature increases, REC flashes in the LCD

monitor and recording stops automatically to protect the HDD.

Turn off the camcorder, wait for a while, and start recording again.

Move away from a place where the camcorder is affected by

excessive sound or vibration (such as a concert hall).

A malfunction may occur in the HDD of the camcorder. In this

case, record to a microSD card.

Insert a commercially available microSD card, and set each of

the [REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] to

[SD].

Recording stops automatically after 12 hours of continuous

recording.

The recorded subject is

too dark.

Use backlight compensation.

Set [GAIN UP] to [AGC] or [AUTO].

Use [NIGHT] from scene select.

Set the brightness to the [+] side.

The recorded subject is

too bright.

Set the backlight compensation to [OFF] if it is being used.

Set the brightness to the [–] side.

Digital zoom does not

work.

Change [ZOOM] to [80X / DIGITAL] or [200X / DIGITAL].

Digital zoom is not available in the still image recording mode.

The focus is not

adjusted automatically.

Wipe the lens with lens cleaning cloth.

If you are recording in a dark place or a subject that has no

contrast between dark and light, adjust the focus manually.

The color looks strange.

(Too bluish, too reddish,

etc)

Set [WB] in [MANUAL SETTING] appropriately to the light source.

Select [MWB] in [WB] while holding a sheet of plain white paper

in front of the camcorder so that the white paper fills the screen.

Keep touching

OK until the

B

indicator appears.

White balance setting

cannot be activated.

This cannot be used if [SEPIA] or [MONOTONE] are selected as

effects.

Do not use [TWILIGHT] from scene select.

The continuous shooting

speed is slow.

The continuous shooting speed will drop after continuous shots.

Continuous shooting speed may drop depending on the recording

media or under certain recording conditions.

Band of bright light

appears on the LCD

monitor.

This occurs when there is a bright light source near the

camcorder. This is not a malfunction. Change the direction of the

camcorder to prevent the light source comes into view.

Mosaic-type noise

occurs when recording

scenes with fast

moving or with extreme

changing in brightness.

Record videos with high quality mode, such as UXP or XP mode.