beautypg.com

Operating in conjunction with tv via hdmi, Operating in conjunction with tv via, Hdmi – JVC Everio GZ-HD320 User Manual

Page 34

background image

EN

Operating in Conjunction with TV via HDMI

Connecting the camcorder to an HDMI-CEC-

enabled TV using the HDMI cable allows you

to utilize the following convenient functions.

HDMI-CEC (Consumer Electronics Control)

is an industry standard that enables

interoperability between HDMI-CEC

compliant devices that are connected via

HDMI cables.

NOTE

Not all HDMI-control devices comply with

the HDMI-CEC standard. The HDMI control

function of the camcorder will not work when

connected to these devices.

The camcorder is not guaranteed to operate

with all HDMI-CEC-enabled devices.

Depending on the specifications of each

HDMI-CEC-enabled device, some functions

may not work with the camcorder. (For

details, refer to the instruction manual of your

TV.)

Unintended operations may occur with some

connected devices. In these cases, set

[HDMI CONTROL] to [OFF].

Preparation:

Connect an HDMI cable between the

camcorder and the TV. (Z p. 32)

Turn on the TV and set the HDMI-CEC

related setting to on. (For details, refer to the

instruction manual of the TV.)

Turn on the camcorder and set [HDMI

CONTROL] to [ON]. (Z p. 67)

Operation method 1

! Turn on the

camcorder.

# Select the playback

mode.

$ Connect the HDMI

cable.

TV turns on

automatically and

switches to HDMI

input mode when the

camcorder is turned

on.

Operation method 2

Turn off the TV.

The camcorder turns

off automatically.

Operation method 3

Depending on the TV connected, the display

language of the camcorder will automatically

switch to the language that is used for the TV

when the camcorder is turned on.

(This is applicable only if the camcorder

supports the language selected for the TV.)

To use the camcorder with a language that

differs from the display language of the TV,

set [HDMI CONTROL] to [OFF].

NOTE

The display language of the TV will not

switch automatically, even if the display

language of the camcorder is changed.

These functions may not work correctly when

devices such as amplifier and selector are

connected. Set [HDMI CONTROL] to [OFF].

If HDMI-CEC does not work properly, turn off

and on the camcorder again.