JVC CA-MD9R - Manual (Page 34)

30
English
3.
Press one of the DISC buttons (1 to 3).
The MD and track numbers start flashing.
❏ If the MD and track numbers stop flashing, press the DISC button (1 to 3) again.
4.
Press the number buttons to select the tracks.
❏ Example: For track 5, press 5. For track 15, press +10 then 5. For track 20, press +10 then
10. For track 32, press +10 three times, then 2.
The MD and track numbers stop flashing, and the step number is displayed.
5.
Repeat steps 3 and 4 to select other tracks for the program.
6.
Press the £ button.
The unit plays the tracks in the order you have programed them.
❏ If you try to program a 33rd step, “MD FULL” will appear on the display.
❏ If you try to program a track from an empty loading slot, or a track number that does not exist
on the MD (for example, selecting track 14 on an MD that only has 12 tracks), such entries are
ignored.
❏ You can skip to a particular program step during Program Play. Rotate the MULTI JOG dial
clockwise or counterclockwise on the unit, or press the
4 or ¢ buttons on the Remote
Control.
❏ To play the Program Play repeatedly, press the REPEAT button. For details, see “Repeating a
Selection or MDs” on page 31.
To stop playing, press the 7 button.
To exit Program Mode, press the PLAY MODE button twice to change to Continuous Play mode
while the MD Recorder is stopped.
Checking the Program ———————————————————————
While the MD Recorder is stopped, use the
4 or ¢ buttons on the Remote Control to check the
contents of the program.
Each time you press the
¢ button, the program contents are shown on the display in the pro-
gramed order. Pressing the
4 button displays the programed steps in the reverse order.
Changing the Program ———————————————————————
Only possible while the MD recorder is stopped.
To delete a program, press the CANCEL button on the unit. Each time you press the button, the last
step is erased.
If you open the loading slot cover, the program is erased.
To add a track to the program, follow the procedure above (on either the unit or the Remote
Control). The new tracks are added to the end of the program.
CD
PROGRAM
MD
CD
15
3
2
1
2
1
MD
3
DISC DISC DISC 3 2 1
CD
PROGRAM
MD
CD
15
3
2
1
2
1
MD
3
Track
number MD
number Step
number
EN.25-40.CA-MD9R[E]/F 6/16/98, 1:50 PM 30