English – JVC KD-AHD39 User Manual

Page 36

ENGLISH

Symptoms

Remedies/Causes

MP3/WMA playback

• Disc cannot be played back.

• Use a disc with MP3/WMA tracks recorded in the format

compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet.

• Add the extension code <.mp3> or <.wma> to the file

names.

• Noise is generated.

Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or WMA
tracks.)

• A longer readout time is required (“READING”

keeps flashing on the display).

Do not use too many hierarchies and folders.

• Tracks do not play back in the order you have

intended them to play.

Playback order is determined when the files are recorded.

• Elapsed playing time is not correct.

This sometimes occurs during play. This is caused by how the
tracks are recorded on the disc.

• “NO FILES” appears on the display.

Insert a disc that contains MP3/WMA tracks.

• Correct characters are not displayed (e.g.

album name).

This unit can only display alphabets (upper case), numbers, and
a limited number of symbols.

CD changer

• “NO DISC” appears on the display.

Insert a disc into the magazine.

• “NO MAGAZINE” appears on the display.

Insert the magazine.

• “RESET 8” appears on the display.

Connect this unit and the CD changer correctly and press the
reset button of the CD changer.

• “RESET 1” – “RESET 7” appears on the display.

Press the reset button of the CD changer.

• The CD changer does not work at all.

Reset the unit (see page 2).

Bluetooth

• Bluetooth device does not detect the unit.

The unit can be connected with one Bluetooth cellular phone
and one Bluetooth audio player at a time.
While connecting a device, the unit cannot be detected from
another device. Disconnect currently connected device and
search again.

• The unit does not detect the Bluetooth device.

• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device detects

the unit, select “OPEN” on the unit to connect the device (see
page 19).

• The unit does not make pairing with the

Bluetooth device.

• Enter the same PIN code into both the unit and the target

device. If the PIN code of the device is not indicated on its
instructions, try “0000” or “1234.”

• Select the device name from “SPECIAL,” then try to connect

again (see page 20).

EN_KDHDR30AHD39_f.indb 36

07.11.16 6:50:22 PM