Bluetooth settings, English – JVC KD-AHD39 User Manual

Page 24

ENGLISH

Bluetooth settings

You can change the settings listed in the right column
according to your preference.

Enter the Bluetooth menu.

Select “SETTINGS.”

⁄

Select a desired setting item.

Change the setting.

7 AUTO CNNCT (connect)

When the unit is turned on, the connection is established
automatically with...
LAST*:

The last connected Bluetooth device

ORDER:

The available registered Bluetooth device found
at first

OFF:

No Bluetooth device

7 AUTO ANSWER

Only for the device being connected for “BT-PHONE.”
ON:

The unit answers the incoming calls
automatically.

OFF*:

The unit does not answer the calls automatically.
Answer the calls manually.

REJECT: The unit rejects all incoming calls.

7 MSG INFO (message info)

Only for the device being connected for “BT-PHONE.”
AUTO*:

The unit informs you of the arrival of a message
by ringing and displaying “RCV MSG” (receiving
message).

MANUAL: The unit does not inform you of the arrival of a

message.

7 MIC SETTING (microphone setting)

Only for the device being connected for “BT-PHONE.”
Adjust the volume of the microphone connected to the
Bluetooth Adapter, [LEVEL 01/02*/03].

7 VERSION

The Bluetooth software and hardware versions are shown.

* Initial setting

Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit the following JVC web site:

(Back to the beginning)

EN_KDHDR30AHD39_f.indb 24

07.11.16 6:50:14 PM