IBM 09N4076 - Manual (Page 17)

To install the IBM Option Diskette device drivers for Windows 98, Windows 95,
Windows 3.x, OS/2 or DOS:
1. Insert the IBM Option Diskette into the diskette drive.
2. Type A:CDSETUP in a command line and press Enter.
3. Click Setup.
4. Follow the on-screen instructions to install the software.
5. Click Exit after software installation completes.
6. Restart your computer so the new settings take effect.
Windows NT 4.0 will automatically detect the presence of the drive. No additional
steps are required to activate the device drivers.
For optional information about configuring the IBM Option Diskette device drivers for
Windows 3.x, DOS, OS/2, Windows 98, and Windows 95, go to Appendix C,
“Customizing device driver configuration settings” on page 2-13.
Step 11. Installing the Easy CD Creator/DirectCD software
Note: Be sure to see the README file for the latest information about the Easy
CD Creator/DirectCD software.
The Easy CD Creator/DirectCD CD contains the following programs:
Easy CD Creator
DirectCD
UDF Reader
To fully use the capabilities of your CD-RW drive, you need to install both the Easy
CD Creator and DirectCD programs. If you also have a MR (multi-read) CD-ROM or
DVD-ROM drive in your computer, you might need to install the UDF Reader
program to read certain CD-R or CD-RW discs in these drives.
To install the Easy CD Creator/DirectCD software for Windows 98, Windows 95,
Windows 2000 or Windows NT 4.0:
1. Insert the Easy CD Creator/DirectCD CD into your CD-RW drive.
2. If the Adaptec Easy CD Creator Installation window opens, follow the onscreen
instructions. If not, continue to the next step.
3. Click Start --> Settings --> Control Panel.
4. Double-click Add/Remove Programs.
5. Follow the on-screen instructions to complete the installation. Repeat as
necessary to install each of the Easy CD Creator, DirectCD, and UDF Reader
components.
6. Restart your operating system.
Part 1: Installation and usage guide 1-9