Intel ECB-870 - Manual (Page 84)

User’s Manual
72 ECB-870 User’s Manual
5. Driver Installation
5.1 Driver Installation for Ethernet Adapter
5.1.1 Windows 9x
The best way to install the driver for the Ethernet controller is to use the plug and play
system of Windows 9x. The following procedures illustrate how the installation can be
done.
1. If a driver for the Ethernet controller is already installed, it must be removed first. This
can be done by following the steps shown below.
• Click the ‘Start’ button, click on ‘Settings’ and on ‘Control panel’ to open the
control panel. Your display should now look as below (possibly with different size
and icons):
• Double click the ‘System’ icon (highlighted above).
• Select the ‘Device Manager’ tab.