Intel ECB-870 - Manual (Page 36)

User’s Manual
24 ECB-870 User’s Manual
3.9.5 RAID Enable / Disable Select (JRAID, ECB-870R Only)
The board integrates with Promise FastTrak100 UltraATA/100 IDE RAID interface that
provides RAID 0 and 1 functions. The function can enable or disable by jumper JRAID and
the RAID level can be set on BIOS. The channel 1 in BIOS stands for IDE3, and the
channel 2 in BOIS stands for IDE4.
You can use JRAID to enable / disable the RAID function. The choice is Enable and
Disable.
RAID Enable / Disable Select (JRAID)
Enable* Disable
* default
3.9.6 Clear CMOS (JRTC)
You can use JRTC to clear the CMOS data if necessary. To reset the CMOS data, short
JRTC for just a few seconds, and then remove the jumper back to open.
Clear CMOS (JRTC)
Protect* Clear CMOS
* default
3.9.7 Watchdog Timer Select (JWDT)
You can use JWDT to enable / disable the onboard Watchdog timer function if necessary.
Watchdog Timer Select (JWDT)
Disable* Enable
* default
JRTC
1 2 3
JWDT
1 2 3 1 2 3
1 2 3
JRAID
1 2 3 1 2 3