Diagram 4 – Impex TSA-499 User Manual

Page 10

Text mode
Original mode

STEP 4 (See Diagram 4)

A.) Attach the side-holes on the Backrest Supports (#15) to the pivot on the Main Seat

Support (#5). Place the other end of Backrest Supports rest against the Backrest
Adjustment Bar.

B.) Attach the Backrest Board (#18) to the Backrest Supports. Secure it with four M6 x 1

3/8” Hex Bolts (#46) and Ø ½” Washers (#50).

C.) Place the Seat (#19) onto the Main Seat Support. Secure it with four M6 x 1 3/8” Hex

Bolts (#46) and Ø ½” Washers (#50).

D.) Use the T-shaped Lock Pin to hold the Backrest Board at vertical position. Note: The

Pin is not designed to sustain any weight. The only purpose is to hold the backrest
board at vertical position while doing squat exercise from the back of the bench.

DIAGRAM 4