IMC Networks IE-IMCV - Manual (Page 6)

2
About IE-iMcV-MultiWay Features and Configuration
The IE-iMcV-MultiWay offers a full feature set including Auto Negotiation, Selective
Advertising, AutoCross, VLANs, SNMP management, loopback testing and OAM. Unit
software updates can be downloaded through TFTP or iView
2 (iConfig view).
IE-iMcV-MultiWay features include:
• SNMP manageable
• OAM AH
o IEEE 802.3ah Link OAM for per port monitoring (OAM AH)
• OAM AH Functions
o Discovery
o Link Performance Monitoring
o Remote Loopback
o Fault Detection
o Link Fault
o Dying Gasp
o Critical Event
• OAM CFM
o IEEE 802.1ag Connectivity Fault Management (OAM CFM)
o OAM CFM Functions
o Continuity Check
o Loopback
• Speed/duplex modes
• 802.1q VLAN
• Extra tagging with user-defined VLAN tag Ethertype
• Ethertype 88A8 as defined in 802.1ad
• Command Line Interface capable (CLI)
• Telnet
• Password assignment via CLI, Telnet or iView²
• DIP Switch configuration for Modes
As a CPE device, the IE-iMcV-MultiWay or IE-MultiWay can behave as a remote to an
iMcV-Giga-FiberLinX-II host when:
1) The iMcV-Giga-FiberLinX-II:
• Is connected via the SFP ports on the IE-iMcV-MultiWay
• Is configured as a Host
• Uses firmware version A1 860-00D1 or higher
2) The SNMP card (if present):
• Uses SNMP firmware version 953-00C8 or higher