IMC Networks IE-IMCV User Manual
Page 16
12
Deleting Community Strings
To delete all community strings, perform the following:
Press U. The "Are you sure you want to delete all future strings?" prompt is displayed.
Press Y when prompted to proceed and delete all community strings, N to abort.
Press Enter to finish.
This function will delete ALL community strings. To selectively delete community
strings, use iView
2
(iConfig view) to configure the device.
Ending the Session
Press E to end a serial port or Telnet/HyperTerminal session before disconnecting the
serial cable. This will stop the continuous stream of data to the serial port.
Rebooting the Unit
To reboot the IE-iMcV-MultiWay, type reboot from the main screen or the command
menu.
Enabling/Disabling DHCP
To toggle DHCP on the IE-iMcV-MultiWay between enable and disable, press D and
then Y. Press the spacebar once to return to the main screen without making any
changes.