IMC Networks IE-IMCV User Manual
Page 25
21
Operational Mode Configuration
There are two modes of operation that can be configured through the Serial/Telnet
session: Mode 1, which supports a mixture of tagged and untagged traffic, and Mode
2 Extra tagging.
The configuration screen is accessed by typing vlan and pressing Enter from the
Additional Commands screen. The system displays the current operation mode
screen. Press the spacebar to select the other mode.
Operation Mode 1 – Mixed Tagged and Untagged Frames
In this mode, all tagged and untagged frames pass on any given port. Management to
the device can be tagged or untagged.
Press the down arrow on the computer keyboard to access additional configuration
selections.