Invacare CTMT-F - Manual (Page 10)

Formula™ CG Tilt Manual Center Mount Front Rigging 10 Part No 1145733
Adjusting the Footplate Width
NOTE: For this procedure, refer to FIGURE 10.
1. Flip footplate down.
2. Remove the mounting screw, nylon washer, washer and wave washer securing the
footplate to the extension tube.
3. Reposition the four 1/4 inch spacers between the footplate and washer as necessary to
achieve the desired footplate width as shown in FIGURE 10.
4. Using the mounting screw, nylon washer, washer and wave washer, secure the
footplate to the extension tube.
5. Repeat STEPS 1 and 4 for the other footplate.
FIGURE 10 Adjusting the Footplate Width
Manual Center Mount Footrest
Footplate
Mounting Screw
1/4 inch Spacers
Washer
Nylon Washer
Wave Washer
Extension Tube
Narrow
(No Spacers)
Footplate
1/4 inch
Spacers
Footplate
Footplate Footplate Footplate
Washer
1/4 inch
Spacers
1/4 inch
Spacers
1/4 inch
Spacers
Washer
Washer Washer
Washer
Medium Narrow
(One Spacers)
Medium
(Two Spacers)
Medium Wide
(Three Spacers)
Wide
(Four Spacers)