Intellinet Network Solutions 524537 - Manual (Page 21)

21
3.8.5 WAN Link Status & Setup
WAN Link Setup
— Select the desired mode from the drop-down menu, which will then dis-
play to the right of “WAN Link Status.” The default setting is “Auto.”
Apply
— Click “Apply,” then “Save” to set and save any changes.
3.8.6 Restore Default / Restart System
Restore Default
— Click to restore the router’s configuration to its factory default settings. The
router will present a confirmation message, then restart automatically.
Restart System
— Click to reboot the router.
3.8.7 Firmware Upgrade
To upgrade the firmware of your router, you need to download the firmware file to your local
hard disk.
New Firmware File
— Enter the firmware file name or click “Browse” to locate it on your PC.