Impex PL-43231 User Manual
Marcy, Magnetic recumbent bike, Impex inc
Table of contents
Document Outline
- BEFORE YOU BEGIN...................................................................................…. 1
- IMPORTANT SAFETY NOTICES..................................................................…. 2
- HARDWARE PACK……….....…....................................................................…. 4
- ASSEMBLY INSTRUCTIONS........................................................................…. 5
- EXPLODED DIAGRAM……………………………………………………………. 10
- PARTS LIST...................................................................................................…. 11 COMPUTER................................................................................................…… 12
- WARRANTY.................................................................................................…. 14
- ORDERING PARTS....................................................................................... 14
- Part# Description Identifier
- ASSEMBLY INSTRUCTION
- Attach the Seat Support (#9) to the Seat Post (#8). Secure it with two M8 x 2 ¾” Hex Bolts (#21), four Ø 5/8” Washers (#20), and two M8 Aircraft Nuts (#22).
- Attach the Seat Handle (#10) to the Seat Support. Secure it with two M8 x 2 ¾” Hex Bolts (#21), four Ø 5/8” Washers (#20), and two M8 Aircraft Nuts (#22).
- A.) Thread the Left Pedal (#11) Counterclockwise into the Left Crank. Thread the Right Pedal (#12) Clockwise into the Crank on the other side.
- 24 Middle Computer Sensor Wire 1
- ASSEMBLY INSTRUCTION