Intel XP-P5CM-GV - Manual (Page 21)

English
21
3.4. Integrated Peripherals
ø This menu allows you to control the various ports of the computer such as IDE,
SATA, USB, IEEE1394, COM port, LPT port, AC97 audio, etc.
n On-Chip Primary PCI IDE
Allows the user to enable or disable the first onboard IDE channel.
(default:Enabled)
n On-Chip SATA Mode
Options: Disabled (Disable this function.)
Auto (BIOS will detect automatically)
Combined (Support up to 4 hard drives: Two for SATA ports and two for
PATA IDE ports)
Enhanced (Allow up to 4 hard drives to be used)
Non-Combined (SATA will be configured to PATA mode)(default:Enhanced)
n No-Execute Memory Protect (Note)
Allows user to enable the No-Execute Memory Protect function. (default: Enabled)
n CPU Enhanced Halt (C1E) (Note)
Allows user to enable the CPU Enhanced Halt (C1E) function. (default: Enabled)
n CPU Thermal Monitor 2(TM2) (Note)
Allows user to enable the CPU Thermal Monitor 2(TM2) function.(default: Enabled)
n CPU EIST Function (Note)
Allows user to enable the CPU EIST function.(default: Enabled)
n On-Chip Frame Buffer Size
Allows user to set the size of the on-chip frame buffer.
Options:
1MB/4MB/8MB/16MB/32MB (default:8MB)
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Integrated Peripherals
On-Chip Primary PCI IDE [Enabled]
On-Chip SATA Mode [Enhanced]
x PATA IDE Set to Ch.0 Master/Slave
SATA Port 0/2 Set to Ch.2 Master/Slave
USB Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
AC97 Audio [Auto]
Onboard H/W LAN [Enabled]
OnBoard LAN Boot ROM [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
higf: Move
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level}
If a hard disk
controller card is
used, set at Disabled
[Enabled]
Enable onboard IDE
PORT
[Disabled]
Disable onboard IDE
PORT
(Note) If the installed CPU supports this function, the system will automatically provide this
option.