IBM C2B 2.25 Brick On Sled carrier 128-pin HPC - Manual (Page 60)

USER RESPONSIBLE F O R V E R I F Y I N G VERSION A N D COMPLETENESS
O E M F U N C T I O N A L SPECIFICATION ULTRASTAR X P (DFHC) SSA M O D E L S 1.12/2.25 GB - 1.0" H I G H
4.2.4 Auto-docking Assembly Side Rails
IBM supplied side rails that can be used for the auto-docking assembly are shown in Figure 17 on page 61
along with mounting location information. Refer to the figure for the following notes:
Note 1: With the side rails mounted within the given tolerances, there will be a nominal 1.5 millimeter
interference between the handle and side rail to provide positive retention of the carrier and the
handle.
Note 2: The IBM part number of the auto-docking side rails is 36G6422.
Source filename=MECHANIC IBM Corporation Page 60 of 87