IBM C2B 2.25 Brick On Sled carrier 128-pin HPC User Manual
Page 24
USER RESPONSIBLE F O R V E R I F Y I N G VERSION A N D COMPLETENESS
O E M F U N C T I O N A L SPECIFICATION ULTRASTAR X P (DFHC) SSA M O D E L S 1.12/2.25 GB - 1.0" H I G H
Figure 4. 5 volt current during read/write operations — C2x Models
1. Read/write baseline voltage.
2. Read/write pulse. The width of the pulse is proportional to the number of consecutive blocks read or
written. The 5 volt supply must be able to provide the required current during this event.
Source filename=POWER
IBM Corporation
Page 24 of 87
This manual is related to the following products: