Assembly – Impex GB-7000AP User Manual

Page 6

Text mode
Original mode

ASSEMBLY:

STEP 1:

Attach the REAR STABILIZER (#15) to the
MAIN FRAME (#1). Securely tighten it with two
CARRIAGE BOLTS, WASHERS AND NUTS.

STEP 2:

Insert the computer sensor wire and hand pulse
sensor wire from the MAIN FRAME (#1) through
the COMPUTER POST (#3). Make sure the
wires come out of the post from the top. Slide
the COMPUTER POST into the post holder on
the MAIN FRAME.

STEP 3:

Securely tighten the COMPUTER POST (#3)
with three ALLEN KEY BOLTS.