Icom IC-M422 - Manual (Page 30)

24
6
DSC OPERATION
New2001
D Transmitting a Polling Request call
Transmit a Polling Request call when you want to know a
specific ship is in the communication area, etc.
q Push [DSC• POS ] to enter the DSC menu.
w Push [Y] or [Z] to select “ ,” push
[DSC• POS ].
e Push [Y] or [Z] to select the desired pre-programmed In-
dividual address.
• The ID code must be set in advance. (p. 13)
r Push [DSC• POS ] to enter the standby condition for Polling
Request call.
• Channel 70 is selected and “ ” appears at the channel
comment indicator.
t Push [DSC• POS ] to transmit the Polling Request call.
y After the Polling Request call has been transmitted, the fol-
lowing indication is displayed.
• “ ” scrolls at the channel comment indicator.
u Push any key to exit the condition and return to the previ-
ous indication before entering the DSC menu.
Scrolls
Transmitting
Scrolls
!IC-M422.qxd 05.2.23 2:21 PM Page 24 (1,1)