Icom IC-M422 - Manual (Page 29)

23
6
DSC OPERATION
New2001
6
D Transmitting a Position Report call
Transmit a Position Report call when you want to announce
your own position to a specific ship and to get an answer, etc.
q Push [DSC• POS ] to enter the DSC menu.
w Push [Y] or [Z] to select “ ,” push [DSC• POS ].
e Push [Y] or [Z] to select the desired pre-programmed In-
dividual address.
• The ID code must be set in advance. (p. 13)
r Push [DSC• POS ] to enter the standby condition for Posi-
tion Report call.
• Channel 70 is selected and “ ” appears at the channel
comment indicator.
t Push [DSC• POS ] to transmit the Position Report call.
y After the Position Report call has been transmitted, the fol-
lowing indication is displayed.
• “ ” scrolls at the channel comment indicator.
u Push any key to exit the condition and return to the previ-
ous indication before entering the DSC menu.
Scrolls
Transmitting
Scrolls
!IC-M422.qxd 05.2.23 2:20 PM Page 23 (1,1)