IGo Direct Stowaway Bluetooth Keyboard - Manual (Page 6)

SECURED CONNECTIONS
1. A Secure connection requires authentication
by entering the same passkey on the mobile
device and then on the keyboard. A secure
connection allows automatic reconnection. Place
the keyboard in Discoverable mode by
pressing the Discoverable button until the green
LED (above the <0> key) flashes. Then select
Enable BT, this will turn on the Bluetooth radio
and begin a scan for the Stowaway keyboard.
2. The Smartphone will scan for the
Stowaway keyboard. Once it is discovered, a
prompt will display, allowing you to enter the
passkey.
3. You are likely to see the Bluetooth Passkey
dialog shown here, but this is variable by
device. Enter a passkey of your own choosing
(of 1-9 digits) using the keypad and press the
Done softkey.
NOTE: The passkey must contain only digits, for
example 111.
Now type the same passkey number on the
Stowaway keyboard. When finished, press the
key.
Stowaway Bluetooth Owner’s Manual - Windows Mobile Smartphone
Page 6