IOGear M1086 User Manual

Page 30

Text mode
Original mode

Step 7
If you have checked the “Check Firmware Version” checkbox, then the utility will check the current
firmware that is on your KVM. If the current firmware is newer than the firmware that you wish to upgrade
to, a window will popup and prompt you to ask if you wish to proceed. Simply click “Yes” to start the
upgrade and “No” to cancel the upgrade.

Note: If you did not check the “Check Firmware Version” checkbox, utility will perform the upgrade automatically
no matter what version of firmware you have in the KVM.

This manual is related to the following products:

M1085 GCS1792 GCS1794