Firmware upgrade – IOGear M1086 User Manual
Page 27
Note: In order to perform a firmware upgrade, you need to use a computer that’s not connected to the KVM.
Step 1
Connect the provided firmware upgrade cable to the firmware upgrade port of the KVM and the serial port
of your computer. Connect power adapter to your power outlet and the KVM.
Step 2
Go to www.iogear.com to download the latest available firmware or the specific firmware that you wish to
upgrade to.
Step 3
Shut down all the computers that are connected to the KVM. Then Invoke Firmware Upgrade Mode.
(Please refer to Hotkeys Setting Mode section.)
Step 4
Extract the file with WinRAR or compatible software. Then double click on the execute file to begin with
the Firmware Upgrade Utility.
26
27
Firmware Upgrade