Impex PM-3200 - Manual (Page 18)

STEP 6 (See Diagram 6 & Cable Loop Diagram)
A.) Attach one end of the 110” Butterfly Cable (#61) onto the hook on the Right Butterfly
Base (#7).
B.) Draw the Cable to the right Swivel Pulley Bracket (#26).
C.) Attach a Pulley to the bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#71), two Ø ¾”
Washers (#84), and one M10 Aircraft Nut (#83).
D.) Draw the Cable around the Pulley then downward. Attach the Cable to an Angled Floating
Pulley Bracket (#25). Repeat C to install another Pulley. Let the Bracket hang for now.
E.) Pull the Cable around the Pulley then upward to the left Swivel Pulley Bracket. Repeat
Step C above to install a Pulley.
F.) Draw the Cable to the Left Butterfly Base (#8). Repeat A to secure the end of the Cable to
the Left Butterfly Base.
17