InFocus 620 - Manual (Page 3)

iii
SAFETY SUMMARY
Please read these instructions carefully before using your LitePro
610 or 620. Failure to comply with them could result in fire, elec-
trical shock, personal injury or damage to equipment.
These graphics are used throughout this manual to draw your
attention to important information about the projectors.
NOTE: Additional useful details or tips.
CAUTION: Steps to avoid damage to your equipment.
WARNING: Steps to avoid personal injury.
These graphics are used on LitePro labels.
Attention: Refer to this User’s Guide for important
safety information.
Hot Surfaces: Avoid touching hot surfaces. Do not touch
until the LitePro has cooled.
Lamp Explosion Hazard: If you continue to use the
lamp after the lamp monitor light comes on, it may
explode, severely damaging your LitePro. Be sure to
replace the lamp when the lamp monitor light comes on
as described in this User’s Guide. Refer to the section
titled “Replacing the Projection Lamp” for information
about changing the bulb.