Intel D975XBX - Manual (Page 48)

Intel Desktop Board D975XBX Product Guide
48
1. Observe the precautions in "Before You Begin" on page 23.
2. Connect the 12 V processor core voltage power supply cable to the 2x4 connector.
Use the 2x2 to 2x4 adapter if needed.
NOTE
Do not use the 2x2 to 2x4 adapter when using an Intel ® Pentium ® processor Extreme Edition or a
processor that is not running at its default settings. Doing so may result in damage to the desktop
board.
3. Connect the main 2x12 power supply cable to the 2x12 connector (see Figure 27).
Other Connectors
Figure 28 shows the location of the other connectors on the desktop board.
OM18198
A C B
D E
Item Description
A PCI bus add-in card connector 2
B PCI Express x16 connector 3 (electrical x4)
C PCI bus add-in card connector 1
D Diskette drive connector
E Chassis intrusion connector
Figure 28. Location of Other Connectors