I/O Magic MagicSpin - Manual (Page 11)

Mounting Your CD-ROM Drive
1 Locate an available drive bay.
Locate an empty drive bay within your computer. It may be necessary to remove a
square iron plate. Please refer to your computer’s User’s Guide for assistance.
2 Slide the MagicSpin CD-ROM drive into the empty bay.
Attach the MagicSpin CD-ROM with the four included screws. Use a Phillips head
screwdriver to secure both sides of the CD-ROM. Make sure that you tighten the screws
fully.
3 Connect the power supply cable.
Connect the power supply cable into the Power Connector on the back of the MagicSpin
CD-ROM drive (Figure 5)
Figure 5: CD-ROM connections
Figure 4: Insert CD-ROM into 5.25 drive bay